Crucial 1GB PC3200 DDR SDRAM DIMM 184-pin 400MHz CL3 Non-ECC


$29.99


A dual inline memory module (DIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.184-pin DIMMs are used to provide DDR SDRAM memory for desktop computers. Standard 184-pin DIMMs are available in PC1600 DDR SDRAM, PC2100 DDR SDRAM, PC2700 DDR SDRAM, and PC3200 SDRAM.To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor tool.)The number of black components on a 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.

 

Module Size - 1GB.
Package - 184-pin DIMM.
Feature - DDR PC3200.
Configuration - 128Meg x 64.
DIMM Type - UNBUFFERED.
Error Checking - NON-ECC.
Speed - DDR400.
Voltage - 2.6V.
Memory Timings - CL-3.

 

  • Model: 37761
  • Shipping Weight: 0.5lbs
  • 25 Units in Stock
  • Manufactured by: Crucial

Be the first to write a review.  Write a Review.

This product was added to our catalog on Tuesday 06 September, 2011.



Sponsors

e-Check

Manufacturers

Who's Online

There currently are 7 guests online.